Printable buyer input · 中英双语

Buyer technical request form

Complete what is known and leave unknown fields blank. The form asks for the finished application and test route; it does not request your confidential formulation.

Email completed form

1. Buyer and project / 客户与项目

Company / 公司

Country / market / 国家或市场

Contact / 联系人

Email / WhatsApp

End application / 最终用途

Expected quantity / 预计数量

Destination port / 目的港

Trial timing / 试样时间

2. Product and construction / 产品与结构

Insulation / 绝缘 Sheath / 护套 Plug or overmolding / 插头包胶 Other injection / 其他注塑

Cable or product type / 线缆或制品

Voltage class / 电压等级

Conductor, wall thickness or drawing / 导体、壁厚或图纸

Color and finish / 颜色与表面

3. Test target and acceptance / 测试目标与判定

Standard, edition and clause / 标准版本条款

Required method, condition and acceptance value / 方法、条件与接受值

Responsible laboratory / 责任实验室

Required market or regulation / 市场或法规要求

4. Processing and current problem / 工艺与当前问题

Extrusion / injection equipment and screw / 设备与螺杆

Actual process record / 实际工艺记录

Current material or good reference / 现用料或良品

Defect, frequency and position / 缺陷、频率与位置

Targets supplied in this form define the requested trial. They do not become Jinhong batch results until an identified lot is tested by the agreed method.

Buyer technical request form

1. Buyer and project / 客户与项目

2. Product and construction / 产品与结构

3. Test target and acceptance / 测试目标与判定

4. Processing and current problem / 工艺与当前问题

5. Files and documents / 文件需求